Model:2 stroke 3.6HP

Overall LxWxH:365*220*920mm

Displacement:52cc

Gear ratio:2.08(27:13)

Cylinder:1

Max. output:2.6kw

Max. speed:4000-5000r/min

Gear positions:Clutch control

Packing size:96*42*28cm

N.W/G.W.:9.64/12.06kg

Ignition system:CDI

Cooling system:Water-cooling

Control system:Tiller control

Starting system:Manual start

Trim and tilt system:Manual tilt

Recommended propeller range:3-7 1/4"x5"

Recommended fuel:#92Lead-free gasoline

Recommended engine oil:Two stroke engine oil

Mixing ratio:Fuel:Oil=50:1

Transom plate height:42cm

Standard fuel tank capacity(L):Winthin 1.5L

Accessories:

1* instruction manual,

1* proportioning pot,

1* tool kit, 1* funnel,

1* cotter pin,1* start the pull plate,

1* water pump impeller.

NOTES:

1. Please carefully read the manual and strictly follow the precautions to have a better experience.

2. Please measure the height of your boat before purchasing to ensure suitability for this product.

3. Please start the motor in the water. If the motor stops circulating water, please stop using it immediately and check the impeller of the water pump to see if the water outlet is blocked.

4. Please note that this product should use a mixture of two-stroke engine oil and 92 # unleaded gasoline. The running-in period of the new machine is 10 hours, during which the fuel ratio is 25L (6.6 gal) of gasoline to 1L (0.26 gal) of engine oil. After 10 hours, the ratio is 50 liters (13.21 gallons) of gasoline to 1 liter (0.26 gallons) of oil.

5. Please do not drive too fast during the running-in period. After the running-in period, the gear oil needs to be replaced, and the second replacement time is about 100 hours or 6 months later.

6. Please do not leave this product outside until the cooling water is completely used up. Otherwise, water will enter the cylinder through the exhaust port, leading to engine failure. After cruising in seawater or turbid water, please clean the outboard motor with fresh water and cool the water channel with fresh water. The engine should be stored in a dry and well-ventilated place, and avoid direct exposure to sunlight.

7. If not in use for a long time, please thoroughly clean the gasoline in the fuel tank.

8. After receiving the machine, if you have any questions, please feel free to consult us.